|
|
| SYSTEM Give your Fancy Full Scope – Systematically. The System-series of GAE consists of a construction-kit of different loudspeaker-systems that can substitute standard elements currently popular. These sound reinforcement systems represent an enormous flexibility as well as a perfect design and up-to-date acoustic characteristics. The loudspeakers assimilate to their environment – always offering a brilliant acoustic result. Because it’s the interaction of the small details that makes visions become innovations. |
GAE SYSTEM 6
|
 |
The GAE System 6
is an extremely compact passive 2-way system with high power capacity. Because of
it’s manageable and unintrusive construction the loudspeaker is applicable to a great
number of tasks. The 6" transducer is vented and enables high loading capacity. The high frequencies are transmitted by a horn-loaded 1" compression driver. This combination produces a convincingly natural sound and a perfect audibility. In comparison with other high frequency loudspeakers the System 6 produces significantly less distortion at high sound pressure levels. An elaborate passive crossover subdivides the input signal in low/mid and high frequency range thereby providing an extraordinarily mellow and natural sound. |
| The multi-layered, birch-ply enclosure is sealed with a
black structure varnish by standard. Different RAL colours are available. The
loudspeaker’s baffle and it’s components are protected by a solid metal front
grill which is covered by a stylish acoustic foam. On demand this foam can be delivered in
different colours. For mounting with optional accessories the System 6 enclosure has been
supplies with M8 threaded shafts (2 on the right side, 1 on the bottom and 1 on the top).
Two M6 threaded shafts on the back allow an attachment of a wall mounting kit UB6/w.
If needed a 35mm stand flange can be attached to the underneath in combination with UB6/v. The connectors are of the Neutrik Speakon NL4 type. An connection diagram on the back describes the internal switching. The 16ohms nominal impedance enables a simple linking of numerous systems attached to one amplifier channel. Characteristics · very compact full-range loudspeaker system · applicable for touring as well as installation · excellently suitable for short and medium throw · can be ideally employed as front-fill and/or for underbalcony mounting · offering studio monitoring quality for live applications · 90° radial dispersion · 16ohms impedance – simple linking of numerous systems to one amplifier channel · passive loudspeaker system with 6" LF/MF-cone driver and 1” horn-loaded HF-compression driver · extensive optional mounting accessories · various colours eligible – standard design: black similar to RAL 9005 |
| TECHNICAL
SPECIFICATION Type Frequency response Power handling capacity Impedance Recommended input power Dispersion Sensitivity Peak SPL (1m) Components Connectors Rigging/Fittings . . . Enclosure Sealing Colours Front protection Weight Dimensions Optional subwoofer Optional system controller Optional accessories |
SYSTEM 6 2-way full-range system, vented enclosure, passive crossover 65 Hz – 19 kHz, +/- 3 dB 100 W IEC norm 268-5 16 ohms nominal 50 – 200 W into 16 ohms 90° radial 91 dB (1 W / 1 m) 114 dB 1 x 6"; 1 x 1" 2 x Neutrik NL4 Speakon (for usage with UB6/v): 2 x M8 threaded shafts at the right side; (for usage with UB6/h): 1 x M8 threaded shaft at the bottom; 1 x M8 threaded shaft at the top; (for usage with UB6/w and UB6/s): 2 x M6 threaded shafts at the rear; opt. stand flange as supplementary part of UB6/h multi-layered birch-ply, (12 mm enclosure, 21 mm baffle) environment-friendly structure varnish on water-basis, non-abrasive standard black, equivalent to RAL9005, other colours on request solid stylish frontgrill, covered with acoustic foam 8.5 kgs 395 x 215 x 220 (mm), H x W x D BR12N, BR15 Setups available U-yoke for horizontal mounting, model UB6/h; UB6/v for vertical mounting incl. stand flange; UB6/w wall mounting kit; UB6/s stand flange adaptor |
| GAE SYSTEM 10
|
 |
The GAE System 10
is a compact passive two way system that can be put to various applications. It excels in
natural recording characteristics, a linear frequency response curve in the whole spectre
of transmission and a high power-handling capacity. The loudspeaker components are placed in a multifunctional enclosure that is only 535x330x300mm small. The HF-sound is emitted in an angle of 90° x 50°. The horn construction has been manufactured from metal and is extremely resistant to mechanical influence. The horn can be 90° rotated which allows an adjustment of the irradiation to a horizontal or vertical mounting. The 10” loudspeaker is situated in a vented enclosure and disposes of a power handling capacity of 200W according to IEC-norm 268-5. Due to an extremely high peak load capacity sound pressure levels up to 120dB (1m) can be obtained. |
| The System 10 is suitable as f.o.h.-loudspeaker for the near field application (among other possibilities as wedge with a positioning angle of 45°) and as delay-line loudspeaker for big audience events. The multi-layered, birch-ply enclosure is sealed with a black structure varnish by standard. Different RAL colours are available. The loudspeaker’s baffle and it’s components are protected by a solid metal front grill which is covered by a stylish acoustic foam. On demand this foam can be delivered in different colours. |  |
| For mobile use two small handling recesses have been
discreetly supplemented to the side walls of System 10. The enclosure is equipped with M8
threaded shafts on the back, M10 threaded shafts on the top and each side walls to enable
the use of metric bolts for installation or the accompanying installation-yoke (UB10/v).
The stand flange can also be replaced by a M10 threaded shaft which allows the application
of the horizontal yoke UB10/h. The connectors are of the Neutrik Speakon NL4 type. An
connection diagram on the back describes the internal switching. Characteristics: · compact loudspeaker system for full-range use · excellently fitted for medium throw- and delay-employment · multifunctional enclosure, angle of monitor position 45° · extensive optional mounting accessories · extremely stable enclosure design · horn-equipped 90° x 50° emission, rotation possible, which allows an adjustment of the irradiation to a horizontal or vertical mounting · passive loudspeaker system incorporating a 10" LF-transducer and a horn-loaded 1" HF compression driver · various colours eligible – standard design: black similar to RAL 9005 |
| TECHNICAL
SPECIFICATION Type Frequency response Power handling capacity Impedance Recommended input power Dispersion Sensitivity Peak SPL (1m) Components Connectors Rigging/Fittings . . Enclosure Sealing Colours Front protection Weight Dimensions Monitor angle Subwoofer Optional system controller Optional accessories |
SYSTEM 10 2-way full-range system, multi-function housing, vented enclosure, passive crossover 60 Hz – 19 kHz, +/- 3 dB 200 W IEC norm 268-5 8 ohms nominal 100 – 400 W into 8 ohms 90° x 50° revolvable 94 dB (1 W / 1 m) 120 dB 1 x 10"; 1 x 1" 2 x Neutrik NL4 Speakon 1 x M10 angle-adjusting threaded shaft at both side for usage with U-yoke UB10/v; stand-flange at the bottom, exchangeable against M10 threaded shaft; together with threaded shaft on the top for usage with U-yoke UB10/h; 2 x M8 threaded shaft on the back for tilting purposes; handling recesses Multi-layered birch-ply (15 mm enclosure, 24 mm baffle) Environment-friendly structure varnish on water-basis, non-abrasive Standard black, equivalent to RAL9005, other colours on request Solid stylish frontgrill, covered with acoustic foam 17 kgs 530 x 330 x 300 (mm), H x W x D 45° BR15; BR115; BR118 Setups available U-yoke for horizontal mounting, model UB10/h; U-yoke for vertical mounting, model UB10/v |
| GAE SYSTEM 12
|
 |
The GAE System 12
has been developed under the premises of achieving the highest degree of flexibility and
adaptability possible regarding the acoustic and technical features of the product. This
concept culminates in the vast variety of possible acoustic applications (installation,
touring, gala) as well as the flying-mechanical realisation of architects’ specific
demands by an intelligent enclosure preparation. All transducers have been outfitted with N/DYM-magnets to enable lowest possible weight. The components are of highest quality - whether driver, filter or enclosure - the design is most elegant and yet the system meets the motto: “Form follows function”. The System 12 is a multi-purpose two-way loudspeaker system that can be either used as an active (powered by two separate amplifier channels – model System 12a) or passive (integrated frequency crossover – model System 12) system. |
| The
vented 12" N/DYM loudspeaker of System 12 is outfitted with a power handling capacity
of 350W according to IEC-norm 268-5 and thus capable of producing sound pressure levels of
up to more than 130dB (1m). Ideally the low-mid transducer is perfected by supplying a 70W
1.4" N/DYM HF-compression driver. The driver is situated on a 80° x 60° (system
variant 12-8) or by choice a 60° x 40° (system variant 12-6) square horn construction.
The hand-laminated fibre-glass horn is extremely robust and resistant to mechanical
influence. The multi-layered, birch-ply enclosure is sealed with a black structure varnish by standard. Different RAL colours are available. The loudspeaker’s baffle and it’s components are protected by a solid metal front grill which is covered by a stylish acoustic foam. On demand this foam can be delivered in different colours. The System 12 combines high output levels with a natural and distortion-free sound (thanks to High-Efficiency-Crossover-Design) in a compact enclosure. Being a full-range loudspeaker it can be used for Medium Throw Purpose as well as for the hard touring routine and installation. Characteristics: · elaborate, unobtrusive design and perfect performance for best acoustic results · professional audio quality for all kinds of installation and live-application · high flexibility, granted by free choice between a 80° x 60° or 60° x 40° horn · squared horn - rotation possible, which allows an adjustment of the irradiation to a horizontal or vertical mounting · active-controllable or passive filtered loudspeaker version by choice · optional attachments for flying or installation · various colours eligible – standard design: black similar to RAL 9005 · ideal for installation and mobile use · 12"-N/DYM LF-transducer and 1.4" N/DYM compression driver |
|
| TECHNICAL
SPECIFICATION Type Frequency response Power handling capacity . Impedance . Recommended input power . Dispersion . Sensitivity Peak SPL (1m) Components Connectors Rigging/Fittings . . . Enclosure Sealing Colours Front protection Weight Dimensions Optional Subwoofer System-controller Optional accessories |
SYSTEM 12 2-way full-range system, vented enclosure 65 Hz – 18 kHz, +/- 3 dB passive crossover 350 W IEC norm 268-5; active LF 350 W, HF 70 W IEC norm 268-5 passive 8 ohms nominal; active LF 8 ohms, HF 8 ohms passive 350 – 700 W into 8 ohms; active LF 350 – 700 W into 8 ohms, HF 70 – 140 W into 8 ohms 80° x 60° revolvable (model System 12-8); 60° x 40° revolvable (model System 12-6) 100 dB (1 W / 1 m); > 130 dB; 1 x 12" N/Dym; 1 x 1,4" N/Dym; 2 x Neutrik NL4 Speakon; for UB12/v: 1 x M10 angle-adjusting threaded shaft at both side; for UB12/h: 1 x M10 threaded shaft on top and bottom; for MB12: 2 x M10 threaded shaft on top and bottom; 2 x M10 threaded shaft on the back for tilting purposes; handling recesses, non-abrasive feet Multi-layered birch-ply (18 mm enclosure, 39 mm baffle) Environment-friendly structure varnish on water-basis, non-abrasive Standard black, equivalent to RAL9005, other colours on request Solid stylish frontgrill, covered with acoustic foam 30 kgs (model System 12); 27 kgs (model System 12a) 660 x 380 x 415 (mm), H x W x D BR115; BR215; BR 118; BR218 Setups for active/passive mode available U-yoke for horizontal mounting, model UB12/h; U-yoke for vertical mounting, model UB12/v; heavy duty outer frame construction for flown installation (MB12) with adjusting tool for different tilting angles (MS460); accessory unit for 3 curving angles (10°, 20°, 30°) between 2 systems one beneath the other (MW10...30); touring case (TC12) for 2 pcs. System 12 |
 |
The System 12TM
offers a maximum of flexibility and allows a multitude of professional sound applications.
Within touring application the system convinces by rugged design and durable sealing at
low weight and easy handling. The mounted Neodymium loudspeaker components are equipped
with a high efficient propulsion system and high resilient voice- coils, which provide
high dynamics and perfect operational reliability. Within application as floor monitor as well as f.o.h.-system the System 12TM shows low distortion in sound together with high assertiveness. Compact and elegant housing design offers applications in a wide range of installations. Several mounting accessories are available. The rigging fittings are unobtrusive and secures a long-lasting mounting junction of the clamping-yoke by „metal to metal“-fastening. |
| The exactly
calibrated passive crossover is performed for usage without mandatory controller, but a
controller operation is recommended to achieve a perfect adaptation to the special
application. Several controller setups are available. The multi-layered, birch-ply enclosure is sealed with a black Polyurea varnish by standard. Different RAL colours are available in polyurethane sealing on request. The loudspeakers’ baffle and it’s components are protected by a solid metal front grill which is covered by a stylish acoustic foam. The connectors are of the Neutrik Speakon 4-pole type, which can be connected to 1+/1- or as an option to 2+/2-. |
 |
| The elegant design
provides the System 12TM’s application in an optical sensitive and ambitious
surroundings. Whether placed mobile on stage or installed on site: The special shape of
the housing enables a lateral or upright mounting. Especially for monitoring purposes and
lateral installation a right and left version is available. The 12" Neodymium chassis with 4" voice-coil and ideal coil overhang enables an effective low frequency equalisation and performs a high dynamic range. The 2" Neodymium compression driver contains a high resistant 3" voice-coil, which is protected by a 2-step maintenance-free limiter. The passive high-performance crossover reduces the quantity of required amplifiers and provides a balanced frequency response with high feedback stability. All crossover components are of high quality and dimensioning and guarantee highest operating reliability. Optimized by controller setups the System 12TM opens a wide
range of applications. If used as monitor, f.o.h.-top or as full-range loudspeaker, the
System 12TM presents a sovereign tool to handle professional audio tasks at the highest
stage. |
| TECHNICAL
SPECIFICATION Type Frequency response . . Power handling capacity . Recommended input power Impedance nominal Dispersion Sensitivity Program SPL Peak SPL Components . Connectors Rigging/Fittings . . . . . . Enclosure Sealing Colours . Front protection Weight Dimensions . . Optional Subwoofer System-controller Optional accessories |
SYSTEM 12TM 2-way full-range system, multi function housing, vented enclosure, passive crossover 55 Hz – 18 kHz (+/- 2,5 dB) with controller 70 Hz – 18 kHz (+/- 3,0 dB) without controller -10,0 dB decay rate at 48Hz without controller 350 W IEC norm 268-5 (37 dBu) 700 W program power, 1000 W peak power 350 W – 700 W / 8 ohms 8 ohms 60° radial 97,0 dB (2,83 V / 8 ohms - 1m) 125,5 dB (700W - 1m) 127,0 dB (1000 W - 1 m) 1 x 12" N/Dym. woofer, 4" voice coil 1 x 2" N/Dym. HF driver, 3" voice coil 2 x Neutrik NL4 Speakon 2 x handling recesses, 2 x rubber strips (monitor position); 3 x M6 for optional polyamide feet mounting; 1 x M10 angle adjusting threaded shaft at both sides; 1 x M10 threaded shaft on the top of the enclosure; 1 x stand flange at the bottom, exchangeable against M10 threaded shaft for horizontal mounting; 2 x M8 on the back for tilting purposes. Multi-layered birch-ply (15 mm) Polyurea varnish, non-abrasive Standard black, equivalent to RAL9005, other colours (only in polyurethane) on request Solid stylish frontgrill, covered with acoustic foam 23,8 kgs 600 x 377 x 343 (mm), H x W x D (H incl. feet: 610mm) 358 x 600 x 434 (mm) monitor position 50°, right and left version available e.g. BR115/215; BR118/218 Setups: fullrange, low extension, monitor U-yoke for horizontal mounting, model UB12TM/h (stand flange to be changed to D110-M10, optional); U-yoke for vertical mounting, model UB12TM/v; Flightcase for 2 systems |
| GAE SYSTEM 15
|
 |
The GAE System 15
is a two-way system which is completely compatible to System 12 but by contrast to this
has been supplied with an enlarged, more powerful deep-tone response. It consists of a
vented 15"-N/DYM low/mid-transducer and a horn loaded 1.4" N/DYM compression
driver. System 15 has as well been developed under the premises of achieving the highest degree of flexibility and adaptability possible regarding the acoustic and technical features of the product. This concept culminates in the vast variety of possible acoustic applications (installation, touring, gala) as well as the flying-mechanical realisation of architects’ specific demands by an intelligent enclosure preparation. All transducers have been outfitted with N/DYM-magnets to enable lowest possible weight. The components are of highest quality - whether driver, filter or enclosure - the design is most elegant and yet the system meets the motto: “Form follows function”. |
| For
System 15 the active operating mode is available optionally. In practice this concept
offers a huge number of advantages: Usually it is driven as passive full-range loudspeaker
(model variant System 15), add one amp-channel and you find additional power and control
in the bass-spectre for the active version (model System 15a). The System 15 is predestined for complex challenges in sport arenas, multi-purpose halls, clubs and theatres as it offers an enormous audibility and – for the active variant – raised power and system control. The vented 15" N/DYM loudspeaker of System 15 is outfitted with a power handling capacity of 350W according to IEC norm 268-5 and thus capable of producing sound pressure levels of up to more than 130dB (1m). Ideally the low-mid transducer is perfected by supplying a 70W 1.4" N/DYM HF-compression driver. The driver is situated on a 80° x 60° (system variant 15-8) or by choice a 60° x 40° (system variant 15-6) square horn construction. The hand-laminated fibre-glass horn is extremely robust and resistant to mechanical influence. The multi-layered, birch-ply enclosure is sealed with a black structure varnish by standard. Different RAL colours are available. The loudspeakers’ baffle and it’s components are protected by a solid metal front grill which is covered by a stylish acoustic foam. On demand this foam can be delivered in different colours. Characteristics: · elaborate, unobtrusive design and perfect performance for best acoustic results · professional audio quality for all sorts of installation and live-usage · high flexibility, granted by free choice between a 80° x 60° or 60° x 40° horn · squared horn - rotation possible, which allows an adjustment of the irradiation to a horizontal or vertical mounting · active-controllable or passive filtered loudspeaker version by choice · optional attachments for flying or installation · various colours eligible – standard design: black similar to RAL 9005 · ideal for installation and mobile use · 15"-N/DYM LF-loudspeaker and 1.4" N/DYM compression driver |
|
| TECHNICAL
SPECIFICATION Type Frequency response Power handling capacity . Impedance . Recommended input power . Dispersion . Sensitivity Peak SPL (1m) Components Connectors Rigging/Fittings . . . Enclosure Sealing Colours Front protection Weight Dimensions Optional Subwoofer System-controller Optional accessories |
SYSTEM 15 2-way full-range system, vented enclosure 48 Hz – 18 kHz, +/- 3 dB passive crossover 400 W IEC norm 268-5; active LF 400 W, HF 70 W IEC norm 268-5 passive 8 ohms nominal; active LF 8 ohms, HF 8 ohms passive 400 – 800 W into 8 ohms; active LF 400 – 800 W into 8 ohms, HF 70 – 140 W into 8 ohms 80° x 60° revolvable (model System 15-8); 60° x 40° revolvable (model System 15-6) 100 dB (1 W / 1 m); > 130 dB; 1 x 15" N/Dym; 1 x 1,4" N/Dym; 2 x Neutrik NL4 Speakon; for UB15/v: 1 x M10 angle-adjusting threaded shaft at both side; for UB15/h: 1 x M10 threaded shaft on top and bottom; for MB15: 2 x M10 threaded shaft on top and bottom; 2 x M10 threaded shaft on the back for tilting purposes; handling recesses, non-abrasive feet Multi-layered birch-ply (18 mm enclosure, 39 mm baffle) Environment-friendly structure varnish on water-basis, non-abrasive Standard black, equivalent to RAL9005, other colours on request Solid stylish frontgrill, covered with acoustic foam 35 kgs (model System 15); 32 kgs (model System 15a) 725 x 450 x 500 (mm), H x W x D BR115; BR215; BR 118; BR218 Setups for active/passive mode available U-yoke for horizontal mounting, model UB15/h; U-yoke for vertical mounting, model UB15/v; heavy duty outer frame construction for flown installation (MB15) with adjusting tool for different tilting angles (MS460); accessory unit for 3 curving angles (10°, 20°, 30°) between 2 systems one beneath the other (MW10...30); touring case (TC15) for 2 pcs. System 15 |
 |
The System 15TM
offers a maximum of flexibility and allows a multitude of professional sound applications.
Within touring application the system convinces by rugged design and durable sealing at
low weight and easy handling. The mounted Neodymium loudspeaker components are equipped
with a high efficient propulsion system and high resilient voice- coils, which provide
high dynamics and perfect operational reliability. Within application as floor monitor as well as f.o.h.-system the System 15TM shows low distortion in sound together with high assertiveness. Compact and elegant housing design offers applications in a wide range of installations. Several mounting accessories are available. The rigging fittings are unobtrusive and secures a long-lasting mounting junction of the clamping-yoke by „metal to metal“-fastening. |
| The exactly
calibrated passive crossover is performed for usage without mandatory controller, but a
controller operation is recommended to achieve a perfect adaptation to the special
application. Several controller setups are available. The multi-layered, birch-ply enclosure is sealed with a black Polyurea varnish by standard. Different RAL colours are available in polyurethane sealing on request. The loudspeakers’ baffle and it’s components are protected by a solid metal front grill which is covered by a stylish acoustic foam. The connectors are of the Neutrik Speakon 4-pole type, which can be connected to 1+/1- or as an option to 2+/2-. |
 |
| The elegant design
provides the System 15TM’s application in an optical sensitive and ambitious
surroundings. Whether placed mobile on stage or installed on site: The special shape of
the housing enables a lateral or upright mounting. Especially for monitoring purposes and
lateral installation a right and left version is available. The 15" Neodymium chassis with 4" voice-coil and ideal coil overhang enables an extremely effective low frequency equalisation. The powerful bass loudspeaker with high dynamics predestine the System 15TM for full range applications within fixed installations. The 2" Neodymium compression driver contains a high resistant 3" voice-coil, which is protected by a 2-step maintenance-free limiter. The passive high-performance crossover reduces the quantity of required amplifiers and provides a balanced frequency response with high feedback stability. All crossover components are of high quality and dimensioning and guarantee highest operating reliability. Optimized by controller setups the System 15TM opens a wide
range of applications. If used as monitor, f.o.h.-top or as full-range loudspeaker, the
System 15TM presents a sovereign tool to handle professional audio tasks at the highest
stage. |
| TECHNICAL
SPECIFICATION Type Frequency response . . Power handling capacity . Recommended input power Impedance nominal Dispersion Sensitivity Program SPL Peak SPL Components . Connectors Rigging/Fittings . . . . . . Enclosure Sealing Colours . Front protection Weight Dimensions . . Optional Subwoofer System-controller Optional accessories |
SYSTEM 15TM 2-way full-range system, multi function housing, vented enclosure, passive crossover 50 Hz – 18 kHz (+/- 2,5 dB) with controller 63 Hz – 18 kHz (+/- 3,0 dB) without controller -10,0 dB decay rate at 44Hz without controller 400 W IEC norm 268-5 (37,5 dBu) 800 W program power, 1150 W peak power 400 W – 800 W / 8 ohms 8 ohms 60° radial 98,0 dB (2,83 V / 8 ohms - 1m) 127,0 dB (800W - 1m) 128,5 dB (1150 W - 1 m) 1 x 15" N/Dym. woofer, 4" voice coil 1 x 2" N/Dym. HF driver, 3" voice coil 2 x Neutrik NL4 Speakon 2 x handling recesses, 2 x rubber strips (monitor position); 3 x M6 for optional polyamide feet mounting; 1 x M10 angle adjusting threaded shaft at both sides; 1 x M10 threaded shaft on the top of the enclosure; 1 x stand flange at the bottom, exchangeable against M10 threaded shaft for horizontal mounting; 2 x M8 on the back for tilting purposes. Multi-layered birch-ply (15 mm) Polyurea varnish, non-abrasive Standard black, equivalent to RAL9005, other colours (only in polyurethane) on request Solid stylish frontgrill, covered with acoustic foam 28 kgs 700 x 448 x 395 (mm), H x W x D (H incl. feet: 710mm) 420 x 700 x 512 (mm) monitor position 50°, right and left version available e.g. BR115/215; BR118/218 Setups: fullrange, low extension, monitor U-yoke for horizontal mounting, model UB15TM/h (stand flange to be changed to D110-M10, optional); U-yoke for vertical mounting, model UB15TM/v; Flightcase for 2 systems |
