SUBLOW Bass: An Element of Gut Feeling. As the deep frequencies of the audio reinforcement specter are fundamental for each musical expression the development of the subwoofer demands GAEs utmost attention. GAE develops professional subwoofers always following the same intentions: · optimization of the efficiency/bandwidth-proportion and the damping-characteristics · selection of the best LF-loudspeakers under mechanic as well as acoustic aspects · convenient handling and high compatibility to all GAE fullrange-systems · perfect acoustic characteristics supported by digital controllers of the latest generation · flexible opportunities of combination due to a setting-data-base for modern digital system controllers |
The GAE BR8N bass system is a perfect low frequency extension ideally suited to the small units of the System-series. Driven by an active crossover the BR8N expands the lower frequency range of a passive top. Special loudspeaker parameters of the 8 woofer together with an optimized and exceeding small vented enclosure achieve an exceptional performance and dynamics. The lowest cutoff frequency was adjusted in favour of sound and acoustical power capacity and the demands for fixed installations. Compactness and elegant design predestine the BR8N for installations with highest quality demands but limited spacing. |
The system is equipped with one handling recess and connection plate hidden on the back. The extended unobstructed ventilation channel prevents from airstream noises and compression effects. The multi-layered, birch-ply enclosure is sealed with a black structure varnish. The front is protected by a metal front grill with high permeability and fronted with acoustic foam. The 2 connectors are of linked Neutrik Speakon 4-pole type. An connection to 2+/2- instead of 1+/1- is possible. Special colours and surfaces are optional. |
Characteristics: · subwoofer to supply the smaller loudspeakers of the System-series · extremely good power/size-ratio · distinguished but discrete enclosure design · incorporates 8" N/Dym long excursion cone driver · extended frequency response from 50Hz 250Hz (-3dB) |
The GAE BR12N bass system is a perfect low frequency extension ideally suited to the small units of the ProStage- and System-series. Driven by an active crossover the BR12N expands the lower frequency range of a passive top. Special loudspeaker parameters of the 12 woofer together with an optimized and exceeding small vented enclosure achieve an exceptional performance and dynamics. Compactness and elegant design predestine the BR12N for installations with highest quality demands. |
The system is equipped with one handling recess and connection plate hidden on the back. The extended unobstructed ventilation channel prevents from airstream noises and compression effects. The multi-layered, birch-ply enclosure is sealed with a black structure varnish. The front is protected by a metal front grill with high permeability and fronted with acoustic foam. The 2 connectors are of linked Neutrik Speakon 4-pole type. An connection to 2+/2- instead of 1+/1- is possible. Special colours and surfaces are optional. |
Characteristics: · subwoofer to supply the smaller loudspeakers of the System- and ProStage-series · extremely good power/size-ratio · distinguished but discrete enclosure design · incorporates 12" N/Dym long excursion cone driver · extended frequency response from 42Hz 250Hz (-3dB) |
The GAE BR15N bass system is a perfect low frequency extension ideally suited to all units of the ProStage- and System-series. Driven by an active crossover the BR15N expands the lower frequency range of a passive top. Special loudspeaker parameters of the 15 woofer together with an optimized and exceeding small vented enclosure achieve an exceptional performance and dynamics. Compactness and elegant design predestine the BR15N for installations with highest quality demands. |
The system is equipped with one handling recess and connection plate hidden on the back. The extended unobstructed ventilation channel prevents from airstream noises and compression effects. The multi-layered, birch-ply enclosure is sealed with a black structure varnish. The front is protected by a metal front grill with high permeability and fronted with acoustic foam. The 2 connectors are of linked Neutrik Speakon 4-pole type. An connection to 2+/2- instead of 1+/1- is possible. Special colours and surfaces are optional. |
Characteristics: · subwoofer to supply all loudspeakers of the System- and ProStage-series · extremely good power/size-ratio · distinguished but discrete enclosure design · incorporates 15 N/Dym long excursion cone driver · 4 ohms version available · extended frequency response from 42Hz 250Hz (-3dB) |
The GAE BR115 is
a low frequency extension to the ProStage and System series. It is a vented enclosure
loaded with a 15 long excursion cone driver. On demand a passive version
incorporating a low-pass filter (model BR115p) is available. This loudspeaker has a
nominal input-impedance of 8ohms 4ohms (model BR115-4) on request. The subwoofers loudspeaker chassis operates in an optimally tuned enclosure which allows to maximize the loudspeakers acoustic output. The unique efficiency/bandwidth-ratio in accordance with the optimised attenuation characteristics provide an almost unlimited usability. The maximum utilization of the mechanical and thermal transducer characteristics allow the achievement of sound pressure levels up to 126.5dB (1m). |
The huge ventilation channel has been constructed of 15mm
multiplex. It ensures an excellent bass-reflex-effectiveness and at the same time
compounds the baffles static. The enclosures walls as well have been
manufactured of high-quality birch multiplex and are additionally equipped with stiffening
frames to suppress wall resonance. The carrying recesses have been especially designed to allow an uncomplicated handling and additionally stiffen the loudspeakers sidewalls. Furthermore the threaded flange-plates for the accommodation of satellite stands have been placed in the cavity of the extremely stable recesses thus allowing the bass enclosures elegant appearance. The enclosure is sealed with a black structure varnish. Colours in different RAL-tones are available. The loudspeakers baffle and its components are protected by a solid metal front grill which is backed with acoustic foam. The overall construction meets all demands thinkable on the grounds of professional sound reinforcement technology whether in the mobile touring routine or in sophisticated installation. Characteristics: - subwoofer to supply the full-range loudspeakers of the ProStage and System series - unique efficiency/bandwidth ratio plus optimised attenuation characteristics - high flexibility due to diverse model versions (active/passive & 4/8ohms) - distinguished enclosure design and stable mechanical processing - includes M20 threaded stand flange - equipped with 15 long excursion cone driver - extended frequency response from 42Hz 250Hz (-3dB) |
The GAE BR215
chiefly complements the full-range systems of the ProStage and the bigger models of the
System series. It is a vented enclosure loaded with two 15 long excursion cone
drivers. On demand a passive low-pass filter can be supplemented. This subwoofer offers an
input impedance of 4ohms. Both subwoofers loudspeaker chassis operate in an
optimally tuned enclosure which allows to maximize the loudspeakers acoustic output.
The maximum utilization of the mechanical and thermal transducers characteristics allow
the achievement of sound pressure levels up to 126.5dB (1m). The extraordinary ventilation channel has been constructed of 15mm multiplex setting new benchmarks in bass enclosure design. By this new type of ventilation channel and side walls both driver chassis are symmetrically enclosed and thereby symmetrically loaded. Because of this construction swaying movements of the membrane are reduced to a minimum whereas the output power is raised to a maximum. The huge ventilation channel ensures an excellent bass reflex effectiveness without compression effects and at the same time compounds the baffles static. |
|
The
enclosures walls have been manufactured of high-quality birch multiplex and are
additionally equipped with stiffening frames to suppress wall resonance. The carrying recesses have been especially designed to allow an uncomplicated handling and additionally stiffen the loudspeakers sidewalls. Furthermore the threaded flange-plates for the accommodation of satellite stands have been placed in the cavity of the extremely stable recesses thus allowing the bass enclosures elegant appearance. The enclosure is sealed with a black structure varnish. Colours in different RAL-tones are available. The loudspeakers baffle and its components are protected by a solid metal front grill which is backed with acoustic foam. The overall construction meets all demands thinkable on the grounds of professional sound reinforcement technology whether in the mobile touring routine or in sophisticated installation. Characteristics: - subwoofer to supply the full-range loudspeakers of the ProStage and System series - unique efficiency/bandwidth ratio plus optimised attenuation characteristics - high flexibility due to diverse model versions (active/passive) - distinguished enclosure design and stable mechanical processing - includes M20 threaded stand flange - equipped with 2x 15 long excursion cone driver - extended frequency response from 42Hz 250Hz (-3dB) - High Static Symmetrical Load Bass Reflex Design |
The GAE BR118 is
a sub low-extension for the full-range loudspeakers of the GAE ProStage and the bigger
models of the GAE System series as well as for comparable loudspeaker systems. The
subwoofers loudspeaker chassis operates in an optimally tuned enclosure which allows
to maximize the loudspeakers acoustic output. The unique efficiency/bandwidth-ratio in accordance with the optimised attenuation characteristics provide extensive usability. The maximum utilization of the mechanical and thermal transducer characteristics allow the achievement of sound pressure levels up to 129dB (1m). The huge ventilation channel has been constructed of 18mm multiplex. It ensures an excellent bass-reflex-effectiveness and at the same time compounds the baffles static. The enclosures walls as well have been manufactured of high-quality birch multiplex and are additionally equipped with stiffening frames to suppress wall resonance. |
|
The
carrying recesses have been especially designed to allow an uncomplicated handling and
additionally stiffen the loudspeakers sidewalls. Furthermore the threaded
flange-plates for the accommodation of satellite stands have been placed in the cavity of
the extremely stable recesses thus allowing the bass enclosures elegant appearance.
The enclosure is sealed with a black structure varnish. Colours in different RAL-tones are
available. The loudspeakers baffle and its components are protected by a solid
metal front grill which is backed with acoustic foam. On the top and one side of the enclosure a M20 threaded stand flange has been installed which allows the mounting of a satellite stand in upright or lying position. Finally four carrying recesses on the enclosures side walls guarantee a balanced transport. The overall construction meets all demands thinkable on the grounds of professional sound reinforcement technology whether in the mobile touring routine or in sophisticated installation. Characteristics: - subwoofer to supply the full-range loudspeakers of the ProStage and System series - unique efficiency/bandwidth ratio plus optimised attenuation characteristics - distinguished enclosure design and stable mechanical processing - includes M20 threaded stand flange - equipped with 18 long excursion cone driver - extended frequency response from 38Hz 250Hz (-3dB) |
The GAE BR218
complements the full-range systems of the ProStage and the bigger models of the System
series and at the same time represents the flagship of the BR-series. It is a vented
enclosure loaded with two 18 long excursion cone drivers. This subwoofer offers an
input impedance of 4ohms. Both subwoofers loudspeaker chassis operate in an
optimally tuned enclosure which allows to maximize the loudspeakers acoustic output.
The maximum utilization of the mechanical and thermal transducer characteristics allow the
achievement of sound pressure levels up to 135dB (1m). The extraordinary ventilation channel has been constructed of 18mm multiplex setting new benchmarks in bass enclosure design. By this new type of ventilation channel and side walls both driver chassis are symmetrically enclosed and thereby symmetrically loaded. Because of this construction swaying movements of the membrane are reduced to a minimum whereas the output power is raised to a maximum. The huge ventilation channel ensures an excellent bass reflex effectiveness without compression effects and at the same time compounds the baffles static. |
The enclosures
walls have been manufactured of high-quality birch multiplex and are additionally equipped
with stiffening frames to suppress wall resonance. The carrying recesses have been
especially designed to allow an uncomplicated handling and additionally stiffen the
loudspeakers sidewalls. The enclosure is sealed with a black structure varnish.
Colours in different RAL-tones are available. The loudspeakers baffle and its
components are protected by a solid metal front grill which is backed with acoustic foam. The overall construction meets all demands thinkable on the grounds of professional sound reinforcement technology whether in the mobile touring routine or in sophisticated installation. Characteristics: - subwoofer to supply the full-range loudspeakers of the ProStage and System series - unique efficiency/bandwidth ratio plus optimised attenuation characteristics - distinguished enclosure design and stable mechanical processing for the hard touring routine - includes M20 threaded stand flange - equipped with 2x 18 long excursion cone driver - extended frequency response from 38Hz 250Hz (-3dB) - High Static Symmetrical Load Bass Reflex Design |
GAEs
uncompromising bass horn construction is called ETAMAX. It allows the reproduction of low
frequencies with a minimum distortion and high sound pressure levels. State-of-the-art
simulation programs and elaborated enclosures are the basis for the optimized horn contour
and its folding. By the help of the backwards enclosure-chamber the parameters of the
18 driver are exactly adjusted to the acoustic situation of the pressure
chamber and the sound conduction. The acoustical resistance thus obtained damps the driver
optimally and produces a frequency specter largely expanded to the low specter without
bothersome resonances. By stacking several ETAMAXs this effect is redoubled, leading to a major horn construction unsurpassed in sound and power. ETAMAX reproduces low frequencies exactly, powerfully and with noticeable directivity. It is especially apt to back up far-ranging sound systems (as for instance GAEs WaveLine) in the bass range. The particular economy of this bass horn construction becomes apparent with big sound engineering challenges as the usual number of high power amplifiers can be drastically reduced. The operation of an "ideal" 30 Hz horn (6 pieces of ETAMAX) with a total impedance of 2x 2.7 ohms and an appropriate 2 channel amplifier is highly economic. As the complex parts of the impedance virtually vanish into thin air such an application offers a perfect resistance to the amplifier. |
The toll taken by
these special ETAMAX construction-characteristics rests with its dimensions, but the
ingenious positioning of the 10 handholds simplifies the handling. Aluminum fixing bolts
in the top and the bottom of the enclosure close to its back guarantee a save stacking.
The enclosure is sumptuously built of high quality multi-layered birch-ply and sealed with
a black structure varnish by standard. Different RAL colours are available. The
loudspeakers baffle and its components are protected by a solid metal front
grill which is backed with an opaque acoustic foam. Characteristics: · high performance bass horn for powerful sound engineering · mirror-symmetrically applicable enclosure construction for axially symmetric large horns · perfect enclosure design and stable mechanical processing for the hard touring routine · frequency response down to 30 Hz (-3dB) when ideally applied |