SYSTEM Give your Fancy Full Scope Systematically. The System-series of GAE consists of a construction-kit of different loudspeaker-systems that can substitute standard elements currently popular. These sound reinforcement systems represent an enormous flexibility as well as a perfect design and up-to-date acoustic characteristics. The loudspeakers assimilate to their environment always offering a brilliant acoustic result. Because its the interaction of the small details that makes visions become innovations. |
The GAE System 4N multi-function loudspeaker is a high-quality broadband reinforcement system incorporating a 4 fullrange cone driver mounted in a closed enclosure. The special cone driver with coated membrane and Neodymium-magnet gets cooled by a temperature leading element which conducts magnet and metal housing. This cooling system provides a high power capacity of the cone driver. The baffle is optimized for sound radiation, the rearside mounted loudspeaker chassis enables an extended mem-brane excursion. |
The loudspeaker system shows a natural vocal
reinforcement. Together with the extremely compact housing dimensions the GAE System 4N is
a perfect choice for precious installation applications. Characteristics · extremely compact broadband loudspeaker system · amazing high power capacity using an 1" voice coil and by passive cooling · 16ohms impedance simple linking of numerous systems to one amplifier channel · various colours eligible standard design: black similar to RAL 9005 |
The GAE System 6
is an extremely compact passive 2-way system with high power capacity. Because of
its manageable and unintrusive construction the loudspeaker is applicable to a great
number of tasks. The 6" transducer is vented and enables high loading capacity. The high frequencies are transmitted by a horn-loaded 1" compression driver. This combination produces a convincingly natural sound and a perfect audibility. In comparison with other high frequency loudspeakers the System 6 produces significantly less distortion at high sound pressure levels. An elaborate passive crossover subdivides the input signal in low/mid and high frequency range thereby providing an extraordinarily mellow and natural sound. |
The multi-layered, birch-ply enclosure is sealed with a
black structure varnish by standard. Different RAL colours are available. The
loudspeakers baffle and its components are protected by a solid metal front
grill which is covered by a stylish acoustic foam. On demand this foam can be delivered in
different colours. For mounting with optional accessories the System 6 enclosure has been
supplied with M8 threaded shafts (2 on the right side, 1 on the bottom and 1 on the top).
Two M6 threaded shafts on the back allow an attachment of a wall mounting kit UB6/w.
If needed a 35mm stand flange can be attached to the underneath in combination with UB6/v. The connectors are of the Neutrik Speakon NL4 type. A connection diagram on the back describes the internal switching. The 16ohms nominal impedance enables a simple linking of numerous systems attached to one amplifier channel. Characteristics · very compact full-range loudspeaker system · applicable for touring as well as installation · excellently suitable for short and medium throw · can be ideally employed as front-fill and/or for underbalcony mounting · offering studio monitoring quality for live applications · 90° radial dispersion · 16ohms impedance simple linking of numerous systems to one amplifier channel · passive loudspeaker system with 6" LF/MF-cone driver and 1 horn-loaded HF-compression driver · extensive optional mounting accessories · various colours eligible standard design: black similar to RAL 9005 |
The GAE System 6CX is a 6,5 coaxial loudspeaker of highest quality, equipped with an integrated passive cross-over within a vented multilayer enclosure. The system provides a 90° radial dispersion. The loudspeaker and crossover components are of high power capacity and provide dynamic sound reinforcement as per a microphone live capability. The axis-symmetric dispersion together with an extended, constant frequency response offers to a high feedback suppression. |
Together with the extremely compact housing dimensions the
GAE System 6CX is a perfect choice for precious installation applications. Each
side wall is equipped with a M8 threaded shaft to enable the mounting of the optional
installation yoke UB6CX by means of metric bolts. Characteristics · very compact coaxial 2-way full-range loudspeaker system · applicable for touring as well as installation · excellently suitable for short and medium throw · can be ideally employed as front-fill and/or for underbalcony mounting · offering studio monitoring quality for live applications · 90° radial dispersion · passive loudspeaker system with 6"/1 coaxial loudspeaker · extensive optional mounting accessories · various colours eligible standard design: black similar to RAL 9005 |
The GAE System 62
is a twin-coaxial fullrange loudspeaker system, equipped with two 6,5" Neodymium cone
driver and an 1" horn/driver combination. The system ist characterized by natural
sound, equable frequency response all over the complete transmission range and a high
power capability. The special loudspeaker placement as well as the function of the
corrective passive crossover lead to an extremely high efficiency, best dynamics and a
discolouration-free voice- and music-reinforcement of highest demands. The extended
unobstructed ventilation channel prevents from airstream noises and compression effects
and provides an impressive bass sound. The System 62 has an equable axial symmetric directivity and offers a horizontal or vertical operation. The wide range of possible tasks varies from fullrange application in theatres, small Club-PA with bass support to near-fill and peripheral usage. |
Small dimensions,
unintrusive construction and a elegant design of the System 62 provide an application at a
great number of tasks, especially within ambitious events characterized by optical
sensitive ambience. Low weight and different optional accessories facilitate the handling
for different applications. The multi-layered, birch-ply enclosure is sealed with a black structure varnish by standard. Different RAL colours are available. The loudspeakers baffle and its components are protected by a solid metal front grill which is covered by a stylish acoustic foam. On demand this foam can be delivered in different colours. For mobile application the System 62 is outfitted with a small recess handle on the back. |
For mounting with optional accessories the System 62
enclosure has been supplied with M10 threaded shafts on the bottom and on the top
(UB62/h). Four M6 threaded shafts on the back allow an attachment of a mounting kit
UB62/v or eyebolts for tilting purposes. The connectors are of the Neutrik Speakon NL4
type. A connection diagram on the back describes the internal switching. Characteristics: · very compact full-range loudspeaker system for high power requirements · applicable for touring as well as installation · excellently suitable for short and medium throw · can be ideally employed as compact Club-PA-System (Top), front- and peripheral fill and/or for underbalcony mounting · offering studio monitoring quality for live applications · axis symmetrical dispersion 90° horizontal · corrective passive crossover for application to one amplifier channel · two high power 6,5" N/Dym cone driver · 1 horn-loaded HF-compression driver with 44mm voice coil and 90° constant directivity horn · extensive optional mounting accessories · various colours eligible standard design: black similar to RAL 9005 |
The GAE System 10
is a compact passive two way system that can be put to various applications. It excels in
natural recording characteristics, a linear frequency response curve in the whole spectre
of transmission and a high power-handling capacity. The loudspeaker components are placed in a multifunctional enclosure that is only 535x330x300mm small. The HF-sound is emitted in an angle of 90° x 50°. The horn construction has been manufactured from metal and is extremely resistant to mechanical influence. The horn can be 90° rotated which allows an adjustment of the irradiation to a horizontal or vertical mounting. The 10 loudspeaker is situated in a vented enclosure and disposes of a power handling capacity of 200W according to IEC-norm 268-5. Due to an extremely high peak load capacity sound pressure levels up to 120dB (1m) can be obtained. |
The System 10 is suitable as f.o.h.-loudspeaker for the near field application (among other possibilities as wedge with a positioning angle of 45°) and as delay-line loudspeaker for big audience events. The multi-layered, birch-ply enclosure is sealed with a black structure varnish by standard. Different RAL colours are available. The loudspeakers baffle and its components are protected by a solid metal front grill which is covered by a stylish acoustic foam. On demand this foam can be delivered in different colours. |
For mobile use two small handling recesses have been
discreetly supplemented to the side walls of System 10. The enclosure is equipped with M8
threaded shafts on the back, M10 threaded shafts on the top and each side walls to enable
the use of metric bolts for installation or the accompanying installation-yoke (UB10/v).
The stand flange can also be replaced by a M10 threaded shaft which allows the application
of the horizontal yoke UB10/h. The connectors are of the Neutrik Speakon NL4 type. An
connection diagram on the back describes the internal switching. Characteristics: · compact loudspeaker system for full-range use · excellently fitted for medium throw- and delay-employment · multifunctional enclosure, angle of monitor position 45° · extensive optional mounting accessories · extremely stable enclosure design · horn-equipped 90° x 50° emission, rotation possible, which allows an adjustment of the dispersion to a horizontal or vertical mounting · passive loudspeaker system incorporating a 10" LF-transducer and a horn-loaded 1" HF compression driver · various colours eligible standard design: black similar to RAL 9005 |
The GAE System 10CX is a 10 2-way coaxial vented loudspeaker of highest quality, equipped with an integrated passive crossover within an elegant designed trapezoidal enclosure. The system provides a 90° radial dispersion. Internal strutting reduces housing resonances and supports a high housing solidness.The loudspeaker and crossover components are of high power capacity and provide high dynamic sound reinforcement. High capable and large voice coils secure a high operating reliability. The HF-leg is electronically protected against overloading by a two step unattended circuit. |
The System 10CX is applicable for professional sound,
speech and music reinforcement of advanced level. An extended frequency response to the
lower ranges enables a full-range application. A well-balanced frequency response, a flat
impedance behaviour together with an axial symmetric omnidirectional dispersion leads to
an extremely good feedback suppression. The system is equipped with handling recesses. The
enclosure is equipped with M8 threaded shafts on the back, M10 threaded shafts on the top
and each side walls to enable the use of metric bolts for installation or an
installation-yoke. The stand flange can also be replaced by a M10 threaded shaft. The
connectors are of the Neutrik Speakon 4-pole type. Characteristics: · compact loudspeaker system for full-range use · excellently fitted for medium throw- and delay-employment · elegant trapezoidal housing · extensive optional mounting accessories · extremely stable enclosure design · 90° radial symmetric omnidirectional dispersion · various colours eligible standard design: black similar to RAL 9005 |
The GAE System 10CX-TM is a 10 2-way coaxial vented loudspeaker of highest quality, equipped with an integrated passive crossover within a multi functional enclosure. The system provides a 90° radial dispersion. Internal strutting reduces housing resonances and supports a high housing solidness. The loudspeaker and crossover components are of high power capacity and provide high dynamic sound reinforcement. High capable and large voice coils secure a high operating reliability. The HF-leg is electronically protected against overloading by a two step unattended circuit. |
The System 10CX-TM is applicable for professional sound,
speech and music reinforcement of advanced level. An extended frequency re-sponse to the
lower ranges enables a full-range application. A well-balanced frequency response, a flat
impedance behaviour together with an axial symmetric omnidirectional dispersion leads to
an extremely good feedback suppression. For mobile use two small handling
recesses have been discreetly supplemented to the side walls of System 10. The enclosure
is equipped with M8 threaded shafts on the back, M10 threaded shafts on the top and each
side walls to enable the use of metric bolts for installation or the accompanying
installation-yoke (UB10/v). The stand flange can also be replaced by a M10 threaded shaft
which allows the application of the horizontal yoke UB10/h. The connectors are of the
Neutrik Speakon NL4 type. An connection diagram on the back describes the internal
switching. Characteristics: · compact loudspeaker system for full-range use · excellently fitted for medium throw- and delay-employment · multifunctional enclosure, angle of monitor position 45° · extensive optional mounting accessories · extremely stable enclosure design · 90° radial symmetric omnidirectional dispersion · various colours eligible standard design: black similar to RAL 9005 |
The GAE System 12
has been developed under the premises of achieving the highest degree of flexibility and
adaptability possible regarding the acoustic and technical features of the product. This
concept culminates in the vast variety of possible acoustic applications (installation,
touring, gala) as well as the flying-mechanical realisation of architects specific
demands by an intelligent enclosure preparation. All transducers have been outfitted with N/DYM-magnets to enable lowest possible weight. The components are of highest quality - whether driver, filter or enclosure - the design is most elegant and yet the system meets the motto: Form follows function. The System 12 is a multi-purpose two-way loudspeaker system that can be either used as an active (powered by two separate amplifier channels model System 12a) or passive (integrated frequency crossover model System 12) system. |
|
The
vented 12" N/DYM loudspeaker of System 12 is outfitted with a power handling capacity
of 350W according to IEC-norm 268-5 and thus capable of producing sound pressure levels of
up to more than 130dB (1m). Ideally the low-mid transducer is perfected by supplying a 70W
1.4" N/DYM HF-compression driver. The driver is situated on a 80° x 60° (system
variant 12-8) or by choice a 60° x 40° (system variant 12-6) square horn construction.
The hand-laminated fibre-glass horn is extremely robust and resistant to mechanical
influence. The multi-layered, birch-ply enclosure is sealed with a black structure varnish by standard. Different RAL colours are available. The loudspeakers baffle and its components are protected by a solid metal front grill which is covered by a stylish acoustic foam. On demand this foam can be delivered in different colours. The System 12 combines high output levels with a natural and distortion-free sound (thanks to High-Efficiency-Crossover-Design) in a compact enclosure. Being a full-range loudspeaker it can be used for Medium Throw Purpose as well as for the hard touring routine and installation. Characteristics: · elaborate, unobtrusive design and perfect performance for best acoustic results · professional audio quality for all kinds of installation and live-application · high flexibility, granted by free choice between a 80° x 60° or 60° x 40° horn · squared horn - rotation possible, which allows an adjustment of the irradiation to a horizontal or vertical mounting · active-controllable or passive filtered loudspeaker version by choice · optional attachments for flying or installation · various colours eligible standard design: black similar to RAL 9005 · ideal for installation and mobile use · 12"-N/DYM LF-transducer and 1.4" N/DYM compression driver |
The System 12TM
offers a maximum of flexibility and allows a multitude of professional sound applications.
Within touring application the system convinces by rugged design and durable sealing at
low weight and easy handling. The mounted Neodymium loudspeaker components are equipped
with a high efficient propulsion system and high resilient voice- coils, which provide
high dynamics and perfect operational reliability. Within application as floor monitor as well as f.o.h.-system the System 12TM shows low distortion in sound together with high assertiveness. Compact and elegant housing design offers applications in a wide range of installations. Several mounting accessories are available. The rigging fittings are unobtrusive and secures a long-lasting mounting junction of the clamping-yoke by metal to metal-fastening. |
The exactly
calibrated passive crossover is performed for usage without mandatory controller, but a
controller operation is recommended to achieve a perfect adaptation to the special
application. Several controller setups are available. The multi-layered, birch-ply enclosure is sealed with a black Polyurea varnish by standard. Different RAL colours are available in polyurethane sealing on request. The loudspeakers baffle and its components are protected by a solid metal front grill which is covered by a stylish acoustic foam. The connectors are of the Neutrik Speakon 4-pole type, which can be connected to 1+/1- or as an option to 2+/2-. |
The elegant design
provides the System 12TMs application in an optical sensitive and ambitious
surroundings. Whether placed mobile on stage or installed on site: The special shape of
the housing enables a lateral or upright mounting. Especially for monitoring purposes and
lateral installation a right and left version is available. The 12" Neodymium chassis with 4" voice-coil and ideal coil overhang enables an effective low frequency equalisation and performs a high dynamic range. The 2" Neodymium compression driver contains a high resistant 3" voice-coil, which is protected by a 2-step maintenance-free limiter. The passive high-performance crossover reduces the quantity of required amplifiers and provides a balanced frequency response with high feedback stability. All crossover components are of high quality and dimensioning and guarantee highest operating reliability. Optimized by controller setups the System 12TM opens a wide
range of applications. If used as monitor, f.o.h.-top or as full-range loudspeaker, the
System 12TM presents a sovereign tool to handle professional audio tasks at the highest
stage. |
The GAE System 15
is a two-way system which is completely compatible to System 12 but by contrast to this
has been supplied with an enlarged, more powerful deep-tone response. It consists of a
vented 15"-N/DYM low/mid-transducer and a horn loaded 1.4" N/DYM compression
driver. System 15 has as well been developed under the premises of achieving the highest degree of flexibility and adaptability possible regarding the acoustic and technical features of the product. This concept culminates in the vast variety of possible acoustic applications (installation, touring, gala) as well as the flying-mechanical realisation of architects specific demands by an intelligent enclosure preparation. All transducers have been outfitted with N/DYM-magnets to enable lowest possible weight. The components are of highest quality - whether driver, filter or enclosure - the design is most elegant and yet the system meets the motto: Form follows function. |
|
For
System 15 the active operating mode is available optionally. In practice this concept
offers a huge number of advantages: Usually it is driven as passive full-range loudspeaker
(model variant System 15), add one amp-channel and you find additional power and control
in the bass-spectre for the active version (model System 15a). The System 15 is predestined for complex challenges in sport arenas, multi-purpose halls, clubs and theatres as it offers an enormous audibility and for the active variant raised power and system control. The vented 15" N/DYM loudspeaker of System 15 is outfitted with a power handling capacity of 350W according to IEC norm 268-5 and thus capable of producing sound pressure levels of up to more than 130dB (1m). Ideally the low-mid transducer is perfected by supplying a 70W 1.4" N/DYM HF-compression driver. The driver is situated on a 80° x 60° (system variant 15-8) or by choice a 60° x 40° (system variant 15-6) square horn construction. The hand-laminated fibre-glass horn is extremely robust and resistant to mechanical influence. The multi-layered, birch-ply enclosure is sealed with a black structure varnish by standard. Different RAL colours are available. The loudspeakers baffle and its components are protected by a solid metal front grill which is covered by a stylish acoustic foam. On demand this foam can be delivered in different colours. Characteristics: · elaborate, unobtrusive design and perfect performance for best acoustic results · professional audio quality for all sorts of installation and live-usage · high flexibility, granted by free choice between a 80° x 60° or 60° x 40° horn · squared horn - rotation possible, which allows an adjustment of the irradiation to a horizontal or vertical mounting · active-controllable or passive filtered loudspeaker version by choice · optional attachments for flying or installation · various colours eligible standard design: black similar to RAL 9005 · ideal for installation and mobile use · 15"-N/DYM LF-loudspeaker and 1.4" N/DYM compression driver |
The System 15TM
offers a maximum of flexibility and allows a multitude of professional sound applications.
Within touring application the system convinces by rugged design and durable sealing at
low weight and easy handling. The mounted Neodymium loudspeaker components are equipped
with a high efficient propulsion system and high resilient voice- coils, which provide
high dynamics and perfect operational reliability. Within application as floor monitor as well as f.o.h.-system the System 15TM shows low distortion in sound together with high assertiveness. Compact and elegant housing design offers applications in a wide range of installations. Several mounting accessories are available. The rigging fittings are unobtrusive and secures a long-lasting mounting junction of the clamping-yoke by metal to metal-fastening. |
The exactly
calibrated passive crossover is performed for usage without mandatory controller, but a
controller operation is recommended to achieve a perfect adaptation to the special
application. Several controller setups are available. The multi-layered, birch-ply enclosure is sealed with a black Polyurea varnish by standard. Different RAL colours are available in polyurethane sealing on request. The loudspeakers baffle and its components are protected by a solid metal front grill which is covered by a stylish acoustic foam. The connectors are of the Neutrik Speakon 4-pole type, which can be connected to 1+/1- or as an option to 2+/2-. |
The elegant design
provides the System 15TMs application in an optical sensitive and ambitious
surroundings. Whether placed mobile on stage or installed on site: The special shape of
the housing enables a lateral or upright mounting. Especially for monitoring purposes and
lateral installation a right and left version is available. The 15" Neodymium chassis with 4" voice-coil and ideal coil overhang enables an extremely effective low frequency equalisation. The powerful bass loudspeaker with high dynamics predestine the System 15TM for full range applications within fixed installations. The 2" Neodymium compression driver contains a high resistant 3" voice-coil, which is protected by a 2-step maintenance-free limiter. The passive high-performance crossover reduces the quantity of required amplifiers and provides a balanced frequency response with high feedback stability. All crossover components are of high quality and dimensioning and guarantee highest operating reliability. Optimized by controller setups the System 15TM opens a wide
range of applications. If used as monitor, f.o.h.-top or as full-range loudspeaker, the
System 15TM presents a sovereign tool to handle professional audio tasks at the highest
stage. |